Crank handle
Crank handle Crank handle allowing manual movement of the motor and opening of the door even in the event of a power failure or door malfunction. It is important that manual operation takes place in full compliance with safety conditions It is recommended to keep the crank for manual opening near the industrial door in […]
Column guard
Column guard The upright protection column guard is made of high quality scratch-resistant polyester hardening powder paint and is fastened to the floor with hexagonal head screws and special internally threaded sleeves prepared for chemical anchoring (chemical anchor not supplied). ø 102mm tube-shaped Thickness: 5 mm Height: 1000 mm ø 200 mm circular base plate […]
Anemometer
Anemometer Device to detect wind speed and protect the flexible curtain of industrial doors and gates. The sensor consists of a fixed part and a moving part (rotating shaft with 3 blades) and controls the opening of the door in the event of wind above a preset threshold. It is especially useful for very large […]
Buzzer
Buzzer The audible warning buzzer signals with a sound the user entering the range of the optical sensor. The device contributes to a safer working environment and more efficient production processes. Door devices gallery
Traffic light for industrial use
Traffic light for industrial use Signal light consisting of a set of two lights (green and red) that manages traffic flow through the door, designed to meet high safety standards. The green light only lights up when the door is fully open. It is a modular device, so you can compose your own sequence according […]
SPOT sensor
SPOT sensor The infrared spot sensor is a powerful and compact measuring system with the widest possible range of applications. The sensor can measure the exact distance at which a person or object enters the detection area or it can simply trigger a contact at a predefined level. Main features: accurate distance setting excellent detection […]
Badge reader
Badge reader The badge system reader allows access control and door opening in order to efficiently optimise the flow of people and vehicles through different working environments. It is available in magnetic or tag versions. Door devices gallery
Pull cord
Pull cord A long arm made of high-strength INOX 304 stainless steel is placed next to the door. At the end of the arm there is a switch with a rope hanging downwards. The opening command is generated by pulling the rope. Length: 2500 mm Door devices gallery
Infrared photocells
Infrared photocells Infrared photocells with a projector-receiver system can be used both as a safety device to protect the door from accidental collisions with vehicles and forklifts and as an opening control. The photocell placed at a certain distance from the door orders it to open when there is simultaneous passage of people and vehicles. […]
Radar
Radar movement detector CONDOR RADAR Motion and presence detector with combined technology. It integrates a microwave motion detector and an active infrared presence sensor in a single device. Infrared wavelength: 875 mm Possibility of filtering pedestrians and detecting vehicles only Possibility of filtering cross traffic (parallel to the door) Maximum detectable width: 4 m (depending […]
T600-GP control panel
T600-GP control panel T600-GP control panel for automatic vertical rolling doors. supply voltage 230 Vac 50 Hz three-phases electronic card with terminals motor output with inverter motor output 10 – 100 Hz maximum motor power 1 kW encoder-controlled door opening external alphanumeric display ABS box (215 x 445 x 150 mm) degree of protection: IP […]
T500-GP control panel
T500-GP control panel T500/7 control panel for vertically rolling automatic doors. power supply: 400 Vac 50 Hz three-phase with neutral microprocessor circuit board maximum motor power: 1 kW curtain position controlled by electronic encoder cable with plug ABS box (210 x 305 x 120 mm) degree of protection: IP54 Limit switch: digital
T500/7 inverter control panel
T500/7 inverter control panel T500/7 inverter control panel for automatic vertical rolling doors. power supply: 230 Vac 50 Hz single-phase circuit board with removable terminals opening button on the panel emergency button on the panel door lock rotary switch ABS box (390 x 310 x 130 mm) degree of protection: IP 65 230 Vac […]
T500 inverter control panel
T500 inverter control panel T500 inverter control panel for vertically rolling automatic doors. power supply: 230 Vac 50 Hz single-phase circuit board with removable terminals opening button on the panel emergency button on the panel door lock rotary switch ABS box (390 x 310 x 130 mm) degree of protection: IP 65 230 Vac line […]
Metal-detector
Metal-detector Detector device for vehicles and forklifts with magnetic coils on the floor. One or more coils below the transit plane are connected to a sensor that identifies metal objects by detecting differences in the magnetic field. The presence of metal objects in the coil’s area of action causes a change in the electromagnetic field […]
Flashing light
Flashing light Steady / flashing light signal device to improve the working environment safety. The device is available with integrated acoustic signal. Voltage supply: 24 Vac Power: 25 W Energy consumption: 100 mA Color: yellow It complies with UNI 8612 CE marking Operating temperature: -20 / +55 °C Degree of protection: IP 54 Dimensions d. […]
Remote control
Remote control Remote control with hand-held transmitter The radio receiver is installed inside the control panel. One or more hand-held transmitters, with two or four channels, can be set to remotely open a single door or several doors. range up to 150 m settable frequency with 1024 combinations Remote control with transmitter in box for […]
Push button for pedestrian opening
Push button for pedestrian opening Push-button located near the door. If there is heavy foot traffic, it is useful to install a push button that allows the door to be opened only partially. Available at an extra charge: “mushroom” push-button double push-button triple push-button “magic switch” touchless opening button Door devices gallery
T250/6R control panel
T250/6R control panel T250/6R control panel for vertically automatic rolling doors. For the proper control panel assembly, it is required that a thermal overload relay suitable to the power of the installed motor is installed. supply voltage 400 Vac 50 Hz three-phases microprocessor circuit board removable terminals emergency button on the panel door lock rotary switch […]
T500/7 control panel
T500/7 control panel T500/7 control panel for vertically rolling automatic doors. supply voltage 400 Vac 50 Hz three-phases microprocessor electronic board removable terminals opening button on the panel emergency button on the panel door lock rotary switch ABS box protection degree: IP 56 power relay 400 Vac 4 kW Allen-Bradley thermal overload relay for […]